This is an endless choice that is only limited by your imagination. There are numerous mixes available though your concrete supplier but it must be though out well before the pour takes place.

The best time for us is usually about 1 week after the pour, I will inspect the floor and advise the best result for you.

Yes you can but this can be tricky as it is necessary that the beads etc are at the right depth in the concrete to allow correct exposure on grinding. Together with your imagination and our technical advice we can aim to achieve the best finish possible.

Depending on where you live in the country, particularly in southern states heating would probably be preferred and radiates a lovely warmth. In warmer states and in summer down in the southern states nothing is cooler.

Coloured pebbles, different sizes and types of aggregate, glass beads, steel, brass again this is largely limited by your imagination.

All concrete floors can crack, however expansion joints in the correct areas will minimise cracking and repair is simple.

Usually this is not required, once the tiles have been removed the remaining glue and mess can be ground to a brand new surface. However there can be exceptions.

Color can be added to your mix at the time of pouring, this needs to be discussed with your concrete supplier. Ask your supplier for there color range and we recommend that you double the strength to allow for some fading.